Wet Sand Blasting Kit to 5500psi Max
Add this to your Pressure Washer to remove Paint / Rust & Other Coatings that have adhered to Concrete / Brickwork or Steel -- With Ease !
The Reinforced Sand Probe will draw up the sand, mix it with Pressurized Water and blast it out through the Carbide Jetting Nozzle.
Cleaning Any Surface back to its bare material - without breathing in dust particles.
Suit Pressure Washers up to 5500psi - Ready To Use.
Uses Dry Silica Sand or #1 Grit sand and/or Garnett
Industrial Pressure Washing Accessory
- 8 Metres of Inlet Hose
- Head connects to Lance end via 1|4 Inch QC Plug
- 500m | 50cm Reinforced Sand Probe
- 1.2 DIA Meg Nozzle (035) for 9-13 L/Min Machines
- 1.4 DIA Meg Nozzle (045) for 14-17 L/Min Machines