Check Valves RR 15.25 HN 3600psi Pump
Our price: $83.00
CHECK VALVES FOR AR-RR 15.25 HN 3600 PSI PUMP
Kit # 2864
On this Pump there are Six (6) Check Valves.
3 Inlet Valves on the lower side & 3 Outlet Valves on the upper side.
These Check Valves are fitting into the manifold via an 'O' Ring Seal. Located under the three top bolts & at the end of the piston chamber in the manifold.
0-Ring Outer Diameter = 16.70mm
Check Valve Outer Diameter = 16mm
Check Valve Height = 16.2mm
Heat build up can deform the Check Valve Housing, consequently you will suffer a vast decrease in pressure.
If your pump doesn't have a Thermal Relief Valve (Dump Valve) look at installing one. This will help protect the Check Valves by releasing over-heated water & allowing fresh water in.