Float Valve | Brass Adjustable Arm

Float Valve With Brass Adjustable Arm | 3|4 Inch Inlet

Solid Brass Connection fittings and Adjustable Arm for those wanting to build their own Flow & Return Storage Tank.   (Where Flow Rate is above 17 + L/Min.) 

This is the IDEAL Float Valve.

Installation simple - just drill a hole through the side of the tank (whether plastic or metal).

*Even Wheelie Bins make a good water tank - perfect height & small foot print which creates a head pressure to better feed the pump.

If there is access to install the Float Valve then any container can be used.

**If you can't achieve head height - there are 12 Volt Pressure Pumps we can provide that can easily be installed to give the pump enough intake pressure to operate properly.

Length from Tank Wall to end of Float = 230mm