Full Flow Adjustable Bypass Unloader 3|8 Quick Connection With Garden Hose Connection Fittings
Our price: $135.00
Full Flow Adjustable Bypass Unloader - 3/8" Quick Connection Fitting - With Garden Hose Connection Fittings
This significantly reduces heat build up by allowing water to constantly flow through the Pump Manifold.
Our Adjustable Bypass Unloader is a perfect Replacement for Unloaders that recycle water in Manifold once you let go of the gun trigger.
Our Full Flow Unloader allows cool water to continually flow through the Manifold & bypass to:
- Float / Holding Tanks
- Low Pressure intake on other side of Manifold
With this system water flows through the pump manifold & out through the unloader via 1/2" hose barb.
If the unloader hose barb is NOT connected to a float/holding tank, around 10% of the water not used by the pump will discharge to ground while in use. This is dependent on the amount of pressure you have adjusted the unloader to.
When you let go of the gun trigger, the water pressure coming into the pump now continues to flow through the pump and out via hose barb- keeping the pump cooler.
The Adjustable Bypass Unloader will suit Electric & Petrol Driven Pressure Washers that have a 3/8" High Pressure Port in the manifold.
Max Pressure = 4060psi - 40 L/PM
3/8" Unloader Connection to Pump Manifold via Banjo Bolt
This Unloader allows Soft Start & Easy Start capabilities
High Pressure Hose Connection - 3/8" Quick Connection.