High Pressure Washer Cleaner Hose Reels High Pressure Washer Cleaner Hose Reels
Hand Crank Hose Reels
Made from Durable Steel. Centre Hub made from Solid Brass or Stainless Steel.
Our Hand Crank Hose Reels come in different sizes - 30 Metre - 90 Metre.
These Hose Reels are designed to hold up to 30 -90 Metres of 2-Wire Rubber Hose.
They will hold more if Single 1-Wire Braided or Jetting Hose is used.
As With All Hose Reels - It is recommended that you purchase a hose reel that is bigger than your length of hose to ensure hose fits on when wound back up - especially if it is a 3.8 Hose. Hoses must also be wound up neatly also to ensure they fit back onto the reel after use. See our instruction guide re winding up hoses below.
- 4 Bolt Hole Base Plate that Reel can swivel around on or lift out of via Spring Loaded Locking Pin or Fully Welded Fixed Mount.
- Centre Hub can also lock into place so hose won't unwind.
- Hose Tail extends 1.5 Metres with 3/8 Male Plug Quick Connect Coupler to connect to pump.
- For other Connection Hose Fittings see Pressure Washer Hose Fittings Section.
- Solid Frame Mounting Support - Perfect for Trailer or Tray Mounts
- Replacement Parts Available
Here's how to roll a high-pressure hose onto a hose reel efficiently and to avoid kinks:
Preparation:
Release pressure and purge water: Turn off the pressure washer and disconnect the hose from the pump. Open the spray gun to release any remaining pressure and purge water from the hose.
Straighten the hose: Remove any kinks or twists in the hose. A kinked hose won't coil up properly on the reel.
Clean the hose (optional): For better coiling, especially if the hose is dirty or gritty, you can wipe it down with a rag to remove debris. This will prevent scratches on your car or other surfaces if the hose rubs against them later.
Rolling onto the reel:
Find the starting point: Locate the reel's swivel attachment (where the hose connects) and the guide arm (if present).
Start coiling: Begin by walking away from the reel, holding the female end (the end that attaches to the spray gun) of the hose.
Coiling technique: Wind the hose onto the hose reel slowly, layer as you wind and take the time to ensure there are no kinks, bends or twists in the hose, as this can cause issues with cracking over time.
Coil evenly so that you can coil up the entire hose. Use the hand crank if your hose reel is fitted with one.
Maintain tension: Keep a slight tension on the hose as you coil it to prevent it from sagging or getting tangled.
Follow the guide (if present): If your hose reel has a guide arm, use it to position the coils neatly on the reel – otherwise keep using your hand to ensure hose is coiled neatly so that all the hose fits back onto the reel
Secure the end: Once all the hose is coiled, secure the female end to the reel using the designated hook or clamp.
115 Metre High Capacity | Heavy Duty | Hand Crank Hose Reel With A Frame Mounting plus 1.5 Metre Hose Tail
RRP: $1,125.00
Our price: $950.00
20 Metre Industrial Grade 304 Retractable High Pressure Hose Reel - STAINLESS STEEL
Our price: $1,550.00(SPECIAL)
20 Metre Industrial Grade Retractable High Pressure Hose Reel - BLACK Powder Coat
Our price: $1,170.00(SPECIAL)
35 Metre Industrial Grade 304 Retractable High Pressure Hose Reel - STAINLESS STEEL
Our price: $2,315.00
35 Metre Industrial Grade Retractable High Pressure Hose Reel - BLACK Powder Coat **LIMITED STOCK**
Our price: $1,595.00(SPECIAL)
60 Metre BAR Rapid Reel | Hand Crank Lock Pin Hose Reel With Extra Long Hose Tail
RRP: $495.00
Our price: $345.00
60 Metre BAR Rapid Stainless Steel Hose Reel | Hand Crank| Lock Pin | Adjustable Reel Brake | Heavy Duty
RRP: $985.00
Our price: $895.00
.jpg)
70 Metre Stainless Steel Hand Crank Pressure Washer Hose Reel (Made in USA)
RRP: $895.00
Our price: $842.00
Jetter Mini Reel Plus 60 Metre 1|4 Inch Jetting Hose With Shut Off Valve and Gauge
RRP: $1,775.00
Our price: $1,576.00(SPECIAL)
Replacement Stainless Steel (BAR) 1|2 Inch Stainless Steel SWIVEL Hose Reel Hub
RRP: $118.00
Our price: $90.00
