Mecline Italy Adjustable FULL FLOW Bypass Unloader VRF 2

Mecline Italy Adjustable FULL FLOW Unloader | VRF 2 | 3|8 Banjo Bolt Connection With Inline Downstream Detergent Injector 

This significantly reduces heat build up by allowing water to constantly flow through the pump manifold.

Suits Pumps 3000-4500psi to 31 L/Min 

This Adjustable Bypass FULL FLOW Unloader is a perfect Replacement for Unloaders that recycle water in Manifold once you let go of the gun trigger. 

Our Full Flow Unloader allows cool water to continually flow through the Manifold & bypass to:   

• Ground
• Float / Holding Tanks
• Low Pressure intake on other side of Manifold

With this system water flows through the pump manifold & out through the unloader via 1/2" hose barb - when you release the gun trigger.

This significantly reduces heat build up by allowing cool  water to constantly flow through the pump manifold.

If the unloader hose barb is NOT connected to a float/holding tank, around 0% -10% of the water not used by the pump will discharge to ground while in use. This is dependent on the amount of pressure you have adjusted the unloader to.

When you let go of the gun trigger, the water pressure coming into the pump now continues to flow through the pump and out via hose barb- keeping the pump cooler.

The Adjustable Bypass Unloader will suit Electric & Petrol Driven Pressure Washers that have a 3/8" High Pressure Port in the manifold.

Also included are the 1/2" Inlet Garden Hose Fittings that connect directly to your Pump Manifold.

This Unloader allows Soft Start & Easy Start capabilities.

3/8" Unloader Connection to Pump Manifold via Banjo Bolt

High Pressure Hose Connection - 3/8" Male

NB: For Other Fittings - Please go to our Hose Fitting Section Product Category: Pressure Washer Hose Fittings