B.A.R. Group
&   BE
Fast Delivery Pressure Washers
Phone us
Follow us on Facebook Follow us on Youtube
menu button iconMenu

Your Cart

0 Item(s), $0.00

View cart >
Australia Icon
Australian Owned
Dollar Icon
Wholesale Prices
Information Icon
Expert Advice & Information
Quality Icon
Quality Products
Truck Icon
Australia-Wide Shipping
Select your Currency:
Items in Trolley: 0 (AUD 0)
Mecline Italy VRF 2 |Adjustable Banjo Bolt Bypass to Ground Unloader | Buffer Tank Or Return To Inlet Manifold | 4500psi 30 L|Min Max.

Mecline Italy VRF 2 |Adjustable Banjo Bolt Bypass to Ground Unloader | Buffer Tank Or Return To Inlet Manifold | 4500psi 30 L|Min Max.

Adjustable FULL FLOW Unloader | including Water Inlet Fittings | Mesh Filter | Banjo Bolt Connection

RRP: $365.00
Our price: $248.00

Freight calculator


Qty: Add to trolley >  Buy now >

Mecline Italy Adjustable FULL FLOW Unloader | VRF 2 | 3|8 Banjo Bolt Connection 

This significantly reduces heat build up by allowing water to constantly flow through the pump manifold.

Suits Pumps 3000-4500psi to 30 L|Min 

This Adjustable Bypass FULL FLOW Unloader is a perfect Replacement for Unloaders that recycle water in manifold once you let go of the gun trigger. 

Our Full Flow Unloader allows cool water to continually flow through the Manifold & bypass to:   

  • Ground
  • Float | Holding Tanks
  • Low Pressure intake on other side of manifold

With this system water flows through the pump manifold & out through the unloader via 1|2 inch hose barb - when you release the gun trigger.

If the unloader hose barb is NOT connected to a float|holding tank, around 0% -10% of the water not used by the pump will discharge to ground while in use. This is dependent on the amount of pressure you have adjusted the unloader to.

When you let go of the gun trigger, the water pressure coming into the pump now continues to flow through the pump and out via hose barb- keeping the pump cooler.

The Adjustable Bypass Unloader will suit Electric & Petrol Driven Pressure Washers that have a 3|8 Inch High Pressure Port in the manifold.

  • Comes with the 1|2 inch Inlet Garden Hose Fittings that connect directly to your Pump Manifold.
  • This Unloader allows Soft Start & Easy Start capabilities.
  • 3|8 Inch Unloader Connection to Pump Manifold via Banjo Bolt
  • High Pressure Hose Connection - 3|8" Male

NB: For Other Fittings - Please go to our Hose Fitting Section Product Category: Pressure Washer Hose Fittings

Over 35 Years