Full Flow Adjustable Bypass Unloader 22mm Male Screw Connection ** SUPER SPECIAL**
Our price: $45.00(SPECIAL)
** SUPER SPECIAL - LIMITED STOCK **
Full Flow Adjustable Bypass Unloader - 22mm Male Screw Connection
Our Full Flow Adjustable Bypass Unloader is a perfect Replacement for Unloaders that bypass excess water to:
- Float / Holding Tanks
- Low Pressure intake on other side of Manifold
With this system water flows through the pump manifold & out throught the unloader via 1/2" hose barb.
This significantly reduces heat build up by allowing water to constantly flow through the pump manifold.
If the unloader hose barb is NOT connected to a float/holding tank, around 10% of the water not used by the pump will discharge to ground while in use. This is dependent on the amount of pressure you have adjusted the unloader to.
When you let go of the gun trigger, the water pressure coming into the pump now continues to flow through the pump and out via hose barb- keeping the pump cooler.
The Adjustable Bypass Unloader will suit Electric & Petrol Driven Pressure Washers that have a 3/8" High Pressure Port in the manifold.
Max Pressure = 4060psi - 40 L/PM
3/8" Unloader Connection to Pump Manifold via Banjo Bolt
High Pressure Hose Connection - 22mm Male Screw Connection