Seal Kit 18.10A | 4350psi Crank Shaft Pump

SEAL KIT FOR 18.10A   | 4350 psi Crank Shaft Pump | 15 L/Min 

This Seal Kit consists of:

• Part # 28 - Supporting Ring
• Part # 27 - High Pressure Seal
• Part # 25 - Compaction Flake
• Part # 24 - Low Pressure Seal
• Part # 23 - O Ring to Locating Ring

These components are installed into the rear of the Brass Pump Head (Manifold).

Outside Diameter:  28mm

Inside to Suit:        18mm Piston  

___________________________________________________________________

• Part # 21 - Oil Seal - Plunger to Crank Case

These are installed behind the Pistons into the front of the Crank Case into the Housing & stop the water mixing with the Crank Case Oil.

__________________________________________________________________