Water Sand Blasting Kit 1 |(BE Canada) 5500psi
RRP: $365.00
Our price: $295.00
Freight calculator
Wet Sand Blasting Kit #1 to 5500psi Max
Add this to your Pressure Washer to remove Paint / Rust & Other Coatings that have adhered to Concrete / Brickwork or Steel -- With Ease !
The Reinforced Sand Probe will draw up the sand, mix it with Pressurized Water and blast it out through the Carbide Jetting Nozzle.
Cleaning Any Surface back to its bare material - without breathing in dust particles.
Suit Pressure Washers up to 5500psi - Ready To Use | See Requirements below
NOTE ** MINIMUM PERFORMANCE REQUIRED :
3500psi | 15 Litres Per Minute | 10hp Diesel | 11hp + Petrol Engines
Use Dry FINE Partical Silica Sand or #1 Grit sand and/or Garnett (**NOT SUPPLIED **)
Industrial Pressure Washing Accessory
Comes with:
- Detailed Instructions - Please Read | Follow | Keep for future reference
- 8 Metres of Inlet Hose
- Head connects to Lance end via 1|4 Inch QC Plug
- 500m | 50cm Reinforced Sand Probe
- 1.2 DIA Meg Nozzle (035) for 9-13 L/Min Machines